Stand construction
Supervisor of standard (shell-scheme) stand construction
Mikhail Nazarov
+7 (499) 244-08-27
+7 (499) 244-08-23
+7 (985) 344-67-63
sales@expoconsta.ru
The exhibitors are prohibited to cover the exhibition equipment and stand elements with any self-adhesive films, including construction adhesive tape, as well as to perform any mechanical or other actions leading to damage of the exhibition equipment, namely: drilling, fixing elements of artwork belonging to the exhibitor to the stand elements with screws, self-tapping screws, construction adhesive tape, etc. The exhibitors are allowed to attach materials belonging to them to the exhibition equipment and wall panels only with office transparent tapes. It is prohibited to fence the perimeter of the stand with any adhesive tape.
Independent construction:
In order to obtain a permit for the construction of stands at Timiryazev Centre, it is required to undergo a technical documentation verification procedure at ArtCapital. Detailed information on the accreditation procedure and the required documentation can be found on the company's website. (On the main page click on ‘02. Timiryazev Centre Accreditation’)
Standard construction:
For all questions related to the construction of standard (shell-scheme) stands, enquiries about the layout and ordering additional services (not included in the stand package), please contact:
Variants of standard (shell-scheme) stands
Standard 1 stand package
Standard stand Package | sq.m. | |||||
---|---|---|---|---|---|---|
Carpet color alternatives: gray, blue, red, green) | sq.m. | on the entire stand area | ||||
The height of the walls is 2,5m, Octanorm | + | + | + | + | + | |
Storage room 1х1м with sliding door | - | + | + | + | + | |
Octanorm frieze chipboard panel (hinged), height 300 mm | along the length of the stand from the passage side between the stand blocks | |||||
SPOT lamp 50W (color white) | 1 spot to each 3 sq.m | |||||
A block of 220 V sockets up to 1 kW* | pcs. | 1 | 1 | 1 | 2 | 2 |
Octanorm archive сloset 1x0.5; h=1 m | pcs. | 1 | 1 | 1 | 1 | 1 |
Octanorm high showcase (2 glass shelves) 1x0.5 h=2.5m; (with backlight, sliding doors at the top and bottom) | pcs. | - | - | 1 | 2 | 2 |
Octanorm low showcase 1x0.5; h=1m (with sliding doors at the top and bottom) | pcs. | - | 1 | - | - | - |
Round table D-70 cm/Square table 70x70 cm/Table 100x70 cm, to your choice | pcs. | 1 | 1 | 2 | 2 | 2 |
Semi-soft chair | pcs. | 3 | 4 | 6 | 6 | 8 |
Waste basket | pcs. | 1 | 1 | 1 | 2 | 2 |
Wall-mounted hanger | pcs. | 1 | 1 | 1 | 2 | 2 |
Company name on the frieze (standard font) | pcs. | on each open side |
Note:
- Replacement of equipment with other equipment, its use at other stands and refund of funds for unused equipment included in the standard set are not provided.
- The files for printing must be provided in accordance with the established requirements.
- The CUSTOMER is responsible for spelling errors in the provided frieze inscriptions.
- The customer's logos are produced for a fee according to the price list of «MONTAZHNIK COMPANY»
- SPOT 50W lamps and socket blocks are installed only around the perimeter of the frieze part of the stand. In all other cases of the arrangement of fixtures and sockets, their installation is considered as additional work and is calculated in accordance with the prices indicated in the Price List for additional services (works) and equipment.
- Additional equipment is provided according to the price list of «MONTAZHNIK COMPANY».
All equipment and decorative elements are provided on a rental basis.
Superior variants of a standard exhibition stand
Verona stand


Stand package | Unit of measure | Stand area, sq. m | ||||
---|---|---|---|---|---|---|
Carpeting (colour options: grey, blue, red, green) | sq. m. | over the whole stand area | ||||
Stand structures height H-3.5 m | ||||||
Wall height H-2.5 m | ||||||
Fascia h=1 m: milky polycarbonate with the company name on the open sides of the stand, letters h=200 mm | ||||||
Square table 70x70 cm | pcs. | 1 | 2 | 2 | 3 | 3 |
Conference chair | pcs. | 3 | 6 | 8 | 12 | 12 |
Waste basket | pcs. | 1 | 1 | 1 | 2 | 2 |
Information counter 1.0x0.5x1.0 (h) m Octanorm | pcs. | 1 | 1 | 1 | 2 | 2 |
Socket block 220 V / 1 kW (triple) | pcs. | 1 | 1 | 1 | 2 | 2 |
Wall spotlight 100 W | pcs. | 4 | 5 | 6 | 7 | 8 |
Wall coat rack | pcs. | 1 | 1 | 1 | 2 | 2 |
* Power supply is not included | ||||||
Note:
- No substitution of equipment for other equipment, its use at other stands or refunds for unused equipment included in the standard package shall be allowed.
- Files for printing must be provided in accordance with the established requirements.
- The CUSTOMER is responsible for spelling errors in the provided fascia lettering.
- The customer's logos are made for a separate fee according to the price list of MONTAZHNIK.
- Additional equipment is available according to the price list.
- All equipment and decoration elements are available for hire.
- The sketch shows a variant of the standard (shell-scheme) stand with an area of 12 sq. m (corner and linear).
Quadro NEW stand

Stand package | Unit of measure | Stand area, sq. m | |||
---|---|---|---|---|---|
Carpeting (colour options: grey, blue, red, green) | sq. m. | + | + | + | + |
Wall height H-2.5 m (Maxima structure, panels 3 mm (white) | pcs. | + | + | + | + |
Totem H-3 m, silicate glass 1x1 m, 2x3 m | pcs. | + | + | + | + |
Utility room (2x1.5 m) with a door (white) | pcs. | + | + | + | + |
Company name, Oracal (standard font) | pcs. | 1 | 1 | 1 | 1 |
Wall spotlight 50 W (white) | pcs. | 1 pcs. per each 1 metre of the wall | |||
LED spotlight on bracket 70 W (totem) | pcs. | 2 | 2 | 3 | 3 |
Socket block 220 W up to 1 kW * | pcs. | 1 | 2 | 2 | 2 |
Octanorm information counter with internal shelf, 1x0.5 m, h=1 m | pcs. | 1 | 1 | 1 | 2 |
Bar chair Z (black) | pcs. | 1 | 1 | 1 | 2 |
Octanorm cabinet 1x0.5; h=1 m pcs. | pcs. | 1 | 1 | 1 | 2 |
Round table D-70 cm / Square table 70x70 cm / Table 110x70 cm, optional | pcs. | 1 | 1 | 2 | 2 |
Soft chair | pcs. | 4 | 4 | 6 | 8 |
Papaper basket | pcs. | 1 | 2 | 2 | 2 |
Clothes rack | pcs. | 1 | 1 | 1 | 2 |
* Power supply is not included |
Note:
- No substitution of equipment for other equipment, its use at other stands or refunds for unused equipment included in the standard package shall be allowed.
- Files for printing must be provided in accordance with the established requirements.
- The CUSTOMER is responsible for spelling errors in the provided fascia lettering.
- The customer's logos are made for a separate fee according to the price list of MONTAZHNIK.
- Additional equipment is available according to the price list.
- All equipment and decoration elements are available for hire.
Cremona stand


Stand package | Unit of measure | Stand area, sq. m | |||||
---|---|---|---|---|---|---|---|
Carpeting (colour options: grey, blue, red, green) | sq. m | over the whole stand area | |||||
Stand structures height H-3.5 m | |||||||
Wall height H-2.5 m (laminated chipboard attachments, Wenge laminated chipboard pillars) | |||||||
Fascia panel (Wenge laminated chipboard) with inscription (white) | on open sides | ||||||
Round table D 700 mm | pcs. | 1 | 1 | 2 | 2 | 3 | |
Conference chair | pcs. | 3 | 4 | 6 | 8 | 12 | |
Waste basket | pcs. | 1 | 1 | 1 | 2 | 2 | |
Information counter 0,5x1,0(h) m Octanorm | pcs. | 1 | 1 | 1 | 2 | 2 | |
Socket block 220 V / 1 kW (triple) | pcs. | 1 | 1 | 1 | 2 | 2 | |
LED spotlight on bracket 70 W or wall spotlight 100 W | pcs. | 3 | 5 | 6 | 7 | 8 | |
* Power supply is not included |
Note:
- No substitution of equipment for other equipment, its use at other stands or refunds for unused equipment included in the standard package shall be allowed.
- Files for printing must be provided in accordance with the established requirements.
- The CUSTOMER is responsible for spelling errors in the provided fascia lettering.
- The customer's logos are made for a separate fee according to the price list of MONTAZHNIK.
- Additional equipment is available according to the price list.
- All equipment and decoration elements are available for hire.
- The sketch shows a variant of the standard (shell-scheme) stand with an area of 12 sq. m (corner and linear).
Ferrara stand


Stand package | Unit of measure | Stand area, sq. m | ||||
---|---|---|---|---|---|---|
Carpeting (colour options: grey, blue, red, green) | sq. m | over the whole stand area | ||||
Stand structures height H-3.5 m | ||||||
Wall height H-2.5 m | ||||||
Banner mesh with printing and company name on the open sides of the stand | ||||||
Square table 70x70 cm | pcs. | 1 | 2 | 2 | 3 | 3 |
Conference chair | pcs. | 3 | 6 | 8 | 12 | 12 |
Waste basket | pcs. | 1 | 1 | 1 | 2 | 2 |
Information counter 1.0x0.5x1.0 (h) m Octanorm | pcs. | 1 | 1 | 1 | 2 | 2 |
Socket block 220 V / 1 kW (triple) | pcs. | 1 | 1 | 1 | 2 | 2 |
Wall spotlight 100 W | pcs. | 4 | 5 | 6 | 7 | 8 |
Wall coat rack | pcs. | 1 | 1 | 1 | 2 | 2 |
* Power supply is not included |
Note:
- No substitution of equipment for other equipment, its use at other stands or refunds for unused equipment included in the standard package shall be allowed.
- Files for printing must be provided in accordance with the established requirements.
- The CUSTOMER is responsible for spelling errors in the provided fascia lettering.
- The customer's logos are made for a separate fee according to the price list of MONTAZHNIK.
- Additional equipment is available according to the price list.
- All equipment and decoration elements are available for hire.
- The sketch shows a variant of the standard (shell-scheme) stand with an area of 12 sq. m (corner and linear).
Superior variants of a standard exhibition stand
You can order a superior construction for your standard stand.
Contact the exhibition team for information on the cost of superior construction.